? 2007 ixys all rights reserved 1 - 4 mcc 95 mcd 95 20070824 ixys reserves the right to change limits, test conditions and dimensions. i trms = 2x180 a i tavm = 2x116 a v rrm = 800-1800 v data according to iec 60747 and refer to a single thyristor/diode unless otherwise stated. symbol conditions maximum ratings i trms , i frms t vj = t vjm 180 a i tavm , i favm t c = 85c; 180 sine 116 a i tsm , i fsm t vj = 45c t = 10 ms (50 hz), sine 2250 a v r = 0 t = 8.3 ms (60 hz), sine 2400 a t vj = t vjm t = 10 ms (50 hz), sine 2000 a v r = 0 t = 8.3 ms (60 hz), sine 2150 a i 2 dt t vj = 45c t = 10 ms (50 hz), sine 25 300 a 2 s v r = 0 t = 8.3 ms (60 hz), sine 23 900 a 2 s t vj = t vjm t = 10 ms (50 hz), sine 20 000 a 2 s v r = 0 t = 8.3 ms (60 hz), sine 19 100 a 2 s (di/dt) cr t vj = t vjm ; repetitive, i t = 250 a 150 a/s f = 50 hz; t p = 200 s v d = 2 / 3 v drm ; i g = 0.45 a; non repetitive, i t = i tavm 500 a/s di g /dt = 0.45 a/s (dv/dt) cr t vj = t vjm ;v dr = 2 / 3 v drm 1000 v/s r gk = ; method 1 (linear voltage rise) p gm t vj = t vjm ;t p = 30 s 10 w i t = i tavm ;t p = 300 s 5 w p gav 0.5 w v rgm 10 v t vj -40...+125 c t vjm 125 c t stg -40...+125 c v isol 50/60 hz, rms; t = 1 min 3000 v~ i isol 1 ma; t = 1 s 3600 v~ m d mounting torque (m5) 2.5-4.0/22-35 nm/lb.in. terminal connection torque (m5) 2.5-4.0/22-35 nm/lb.in. weight typical including screws 90 g features ? international standard package, jedec to-240 aa ? direct copper bonded al 2 o 3 -ceramic base plate ? planar passivated chips ? isolation voltage 3600 v~ ? ul regist ered, e72873 ? gate-cathode twin pins for version 1 applications ? dc motor control ? softstart ac motor controller ? light, heat and temperature control advantages ? space and weight savings ? simple mounting with two screws ? improved temperature and power cycling ? reduced protection circuits thyristor modules thyristor/diode modules 6 7 4 5 3 2 1 to-240 aa mcd version 8 mcc version 8 mcc version 1 3671 542 361 52 3152 31542 mcd version 1 v rsm v rrm type v dsm v drm v v version 1 b 8 b version 1 b 8 b 900 800 mcc 95-08 io1 b / io8 b mcd 95-08 io1 b / io8 b 1300 1200 mcc 95-12 io1 b / io8 b mcd 95-12 io1 b / io8 b 1500 1400 mcc 95-14 io1 b / io8 b mcd 95-14 io1 b / io8 b 1700 1600 mcc 95-16 io1 b / io8 b mcd 95-16 io1 b / io8 b 1900 1800 mcc 95-18 io1 b / io8 b mcd 95-18 io1 b / io8 b
? 2007 ixys all rights reserved 2 - 4 mcc 95 mcd 95 20070824 ixys reserves the right to change limits, test conditions and dimensions. symbol conditions characteristic values i rrm , i drm t vj = t vjm ; v r = v rrm ; v d = v drm 5ma v t , v f i t /i f = 300 a; t vj = 25c 1.5 v v t0 for power-loss calculations only (t vj = 125c) 0.8 v r t 2.4 m v gt v d = 6 v; t vj = 25c 2.5 v t vj = -40c 2.6 v i gt v d = 6 v; t vj = 25c 150 ma t vj = -40c 200 ma v gd t vj = t vjm ;v d = 2 / 3 v drm 0.2 v i gd 10 ma i l t vj = 25c; t p = 10 s; v d = 6 v 450 ma i g = 0.45 a; di g /dt = 0.45 a/s i h t vj = 25c; v d = 6 v; r gk = 200 ma t gd t vj = 25c; v d = ? v drm 2s i g = 0.45 a; di g /dt = 0.45 a/s t q t vj = t vjm ; i t = 150 a, t p = 200 s; -di/dt = 10 a/s typ. 185 s v r = 100 v; dv/dt = 20 v/s; v d = 2 / 3 v drm q s t vj = t vjm ; i t /i f = 50 a, -di/dt = 6 a/s 170 c i rm 45 a r thjc per thyristor/diode; dc current 0.22 k/w per module other values 0.11 k/w r thjk per thyristor/diode; dc current see fig. 8/9 0.42 k/w per module 0.21 k/w d s creepage distance on surface 12.7 mm d a strike distance through air 9.6 mm a maximum allowable acceleration 50 m/s 2 optional accessories for module-type mcc 95 version 1 b keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red type zy 200l (l = left for pin pair 4/5) ul 758, style 1385, type zy 200r (r = right for pin pair 6/7) csa class 5851, guide 460-1-1 dimensions in mm (1 mm = 0.0394") mcc / mcd version 1 b mcc version 8 b mcd version 8 b version 1 or 8 without b in typ designation = without insert in mountig holes fig. 1 gate trigger characteristics fig. 2 gate trigger delay time
? 2007 ixys all rights reserved 3 - 4 mcc 95 mcd 95 20070824 ixys reserves the right to change limits, test conditions and dimensions. fig. 3 surge overload current i tsm , i fsm : crest value, t: duration fig. 4 i 2 dt versus time (1-10 ms) fig. 4a maximum forward current at case temperature fig. 5 power dissipation versus on- state current and ambient temperature (per thyristor or diode) fig. 6 three phase rectifier bridge: power dissipation versus direct output current and ambient temperature
? 2007 ixys all rights reserved 4 - 4 mcc 95 mcd 95 20070824 ixys reserves the right to change limits, test conditions and dimensions. fig. 7 three phase ac-controller: power dissipation versus rms output current and ambient temperature fig. 8 transient thermal impedance junction to case (per thyristor or diode) fig. 9 transient thermal impedance junction to heatsink (per thyristor or diode) constants for z thjk calculation: ir thi (k/w) t i (s) 1 0.0066 0.0019 2 0.0678 0.0477 3 0.1456 0.344 4 0.2 1.32 r thjk for various conduction angles d: d r thjk (k/w) dc 0.42 180 0.43 120 0.45 60 0.47 30 0.48 constants for z thjc calculation: ir thi (k/w) t i (s) 1 0.0066 0.0019 2 0.0678 0.0477 3 0.1456 0.344 r thjc for various conduction angles d: d r thjc (k/w) dc 0.22 180 0.23 120 0.25 60 0.27 30 0.28
|
